In order to make the tumbler cleaner, please avoid using blurry or out of focus image, the photo should be over 2000 pixels as much as possible. & 6mins for 3D Vacuum Heat Presses or Sublimation Oven. Remove the plastic insert lid and straw.Design your image and print it out on sublimation paper with sublimation ink printer. Tape imaged sublimation paper onto tumbler.
Place and center the product inside the shrink film / sleeve. Use heat gun on low setting to shrink the wrap to the contour of the product. Begin with the side away from the transfer first.Ensure the wrap only encases the sides of the product leaving top and bottom open. Repeat above steps for each item to include in production run. Set the convection oven at 165170? Ensure convection oven has reached temperature, place the tumblers in the preheated oven. Once curing is done, open convection oven, and take the tumbler out of the oven.
Use gloves or heat resistant cloth to handle the hot tumbler. Peel sublimation paper and shrink film off and leave it to cool off completely. Caution: Tumbler is extremely hot when in the mug press, do not handle with bare hands Note: Temperature and time settings are only a guide. Way to stick the rubber coaster to the cups. This item is in the category "Home & Garden\Kitchen, Dining & Bar\Kitchen Storage & Organization\Vacuum Flasks & Mugs".
The seller is "globalsigns16" and is located in this country: US. This item can be shipped to United States, Canada, China, Mexico.